Using Tarpaulin Sheets to Protect Firewood from the Elements
Firewood is essential for any homeowner who uses timber as a source of heat in homes with firewood stoves or fireplaces, for instance. It is extremely important to store firewood and protect it from outside conditions as it will provide the best dry firewood to guide you in emergency circumstances. The simplest and cheapest way to protect your piled-up firewood from rain, snow, wind, or excessive sun is by using Tarpaulin sheets.
Advantages When Using Tarpaulins to Store Firewood
Keeps Wood Dry
Indeed the recommendable idea of using waterproof tarpaulins to cover your stacked firewood will protect the wood from rain and snow. But, live firewood underwater is worthless as a source of fire and also it loses a lot of probable heat. Tarp coverings act as a protective layer that will ensure that the wood does not come in contact with any form of moisture.
Blocks Sun Exposure
An added benefit of putting a tarp over firewood piles is it helps avoid direct sun which will cause the firewood to dry. Firewood that has been exposed to the sun for some time is likely to rot and have some type of mold on it. Protecting it from UV radiation maintains it moist in the same way it was naturally. It also helps it burn hot and give out more heat.
Protects Against Pests
Leaving wood bare also exposes it to several other damages, including attacks by pests including termites, ants, woodlice, and woodpeckers. These formulations bar these intruders from gaining access to penetrate the stack of large tarp sheets. It also minimizes the chances of small mammals such as mice or hedgehogs from making nests from the heaps.
Putting Covers over Piles of Firewood
There are a few key steps to properly cover firewood with Canvas Tarpaulin for weather protection:
- To make it even more effective and ensure that it will always stay in place, it must be laid on a durable tarpaulin under sheet.
- To begin with, place a waterproof tarp directly on the ground to ensure a flat and smooth surface. It’s difficult for moisture from rain or melting snow to find its way under the stacked wood.
- The wood pieces should be stacked tightly, as shown in the top-right stack of the figure above.
- Stack the split firewood compactly so that there are very small gaps and no spaces in between. This enables better, more secure wrapping of the tarp with minimum drooping indicative of wind vibrations.
Drape Oversized Tarp Over the Top
Ensure that your covering tarp is about 20% bigger than the real wood pile size you want to cover. This means enough material is available to cover the stack completely and still overlap the edges by a minimum of two feet.
Weigh Down Edges All-Around
When it is done place some weights on those areas so that the tarp can be firmly placed on the firewood logs. Employ balls of stones, sand, stakes, or rope lines with pegs.
Re-Secure After High Winds
Tighten up the tarp after periods of high winds because this may loosen the tie-downs and create flapping ends of the tarp.
Conclusion
One of the simplest ways of protecting your stacked supply of firewood is to cover it with heavy-duty tarpaulins which is relatively easy to do without professional help. This makes it dry, clean from pests, and ready to warm us throughout the cold seasons when the heating is needed most. Properly draped tarps cover up the UV rays from penetrating wooden structures, and keep water moisture, and pests away from wood. Be sure to use anything but the undersized sheeting with robust grommets and enough ends weighted down to remain as fixed as possible regardless of the winds or the storms. Your firewood will remain in its healthiest state when placed under a high-quality tarpaulin covering.

Comments
Post a Comment